Mousepad 3mm Circle 7.75″ Diameter – Sublimation
This mousepads 3mm thickness, circle shaped with a diameter of 7.75″ for sublimation is now sourced at RQC Supply. Spice up your office with some decorative circle mousepads. Fashionable and usable these mouse pads are perfect for any home office. This product holds amazing colour once sublimated on and doesn’t contain any latex. Revitalize your work area with this 3mm Mousepad.
- 3mm rubber base with polyester surface
- Colorful image reproduction
- Perfect for school, home, office
Imprint area: Approximately 8″x 8″
Material: Neoprene (rubber)
Product Dimensions: 0.125″ (1/8″) x 7.75″ x 7.75″
Heat Method: 190C/ 375F & 80 sec or 385 degrees F for 95-105 seconds using Medium pressure
Transfer Instructions for Mousepad
- Prepare artwork and size transfer according to the size and shape of the product.
- Image must be produced in reverse or “mirror image”
- Place a sheet of plain white paper on the press.
- If the product has a protective plastic covering remove it.
- Using heat resistant tape, secure the image with the printed side of transfer facing the product
- Lay the blank face up on the heat press so that you are pressing onto the transfer.
- Cover blank with parchment or paper
- Press at 385 degrees F for 95-105 seconds using Medium pressure some have used 190C/ 375F & 80 sec
NOTE: When pressing is finished carefully remove the transfer paper and allow to cool on a clean surface
Note: These instructions are guidelines only and are based on the inks, paper, and products we supply. Your inks, papers, etc., may require adjustments in your time/temp settings. If you find a different setting, it is ideal to email us with the method of application and temp/time settings you used; that would be great.