No DTF Printing Mar 28-Mar 31 For Easter FAST TAT 36-48 HRS MON-FRI

Oracal Orajet 1917 Inkjet Printable Adhesive Vinyl (Sticker)

Description

Oracal Orajet 1917 Inkjet Printable Adhesive Vinyl (Sticker) --> Now available in two sizes 8.5" x 11" Sheet x 1 (Letter or Legal 8.5" x 14")

Oracal Orajet 1917 Inkjet Printable Adhesive Vinyl (sticker) is a digital media that is designed to be printed with water-based inks. Inkjet printable vinyl is compatible with dye, oil-based, mild solvent, and pigmented inks. Orajets matte finish and micro-porous, waterproof inkjet coating helps produce brilliant prints, on a side note laminating this printable vinyl aka film drastically increases durability. Lamination is required with the use of dye inks. For applications with direct water contact, edge sealing is recommended. Orajet® 1917 is ideal for displays, exhibits, and general flat signage.

Outdoor Durability 1 year
Thickness 5.5 mil
Colour White
Finish Matte
Adhesive Details Solvent polyacrylate
Adhesive Removability Permanent
Adhesive Colour Clear
Release Liner 83# PE-coated silicone paper
Recom. Applications Short-term outdoor and long-term indoor signs and graphics
Print Compatibility Water-based (desktop) inkjet, dye, oil-based, mild-solvent, and pigmented inks
Conformability Flat surfaces
Recommended Laminate Oraguard® 200

Where can I use Orajet 1917?
For use in brilliant and colourful displays. The film has long-term protection against UV-rays and mechanical stress when combined with ORAGUARD® laminating films. For indoor applications, when using dye-inks, lamination is required. For outdoor applications with direct contact to water, sealing of the edges is recommended.  Note: check UV outdoor rating for the ink being used.  Long term use in direct sunlight may not be recommended.

Oracal recommends spreading out to dry for 72 hours before (can be done laying or hanging).  For storage and processing, they should be kept in a cool, dry place protected from sunlight. Relative air humidity between 40% and 50% and temperature between +I8° C and +22° C should be ensured. Direct sunlight, storage beside radiators etc. should by all means be avoided.

PLEASE READ ENTIRE DESCRIPTION BEFORE PURCHASE OR USE. Product will be shipped loosely rolled, it comes to us on a roll as well. If you have trouble with the curl, try flattening the sheets with a few books prior to printing. Make sure you let your printer know it is a thicker piece of material to avoid jams. 

OraJet 1917 has a matte smearproof inkjet printable coating, allowing you to print at home with an inkjet printer. Oragard is the recommended laminate for this product by Oracal, but other crafters have used clear 651 as well.

Product form

2 in stock

$3.75

🛒 Sale ends in {timer}🔥🔥

 

    • Shipped today? Order within: Mar 29, 2024 12:00:00 -0400

    Description

    Oracal Orajet 1917 Inkjet Printable Adhesive Vinyl (Sticker) --> Now available in two sizes 8.5" x 11" Sheet x 1 (Letter or Legal 8.5" x 14")

    Oracal Orajet 1917 Inkjet Printable Adhesive Vinyl (sticker) is a digital media that is designed to be printed with water-based inks. Inkjet printable vinyl is compatible with dye, oil-based, mild solvent, and pigmented inks. Orajets matte finish and micro-porous, waterproof inkjet coating helps produce brilliant prints, on a side note laminating this printable vinyl aka film drastically increases durability. Lamination is required with the use of dye inks. For applications with direct water contact, edge sealing is recommended. Orajet® 1917 is ideal for displays, exhibits, and general flat signage.

    Outdoor Durability 1 year
    Thickness 5.5 mil
    Colour White
    Finish Matte
    Adhesive Details Solvent polyacrylate
    Adhesive Removability Permanent
    Adhesive Colour Clear
    Release Liner 83# PE-coated silicone paper
    Recom. Applications Short-term outdoor and long-term indoor signs and graphics
    Print Compatibility Water-based (desktop) inkjet, dye, oil-based, mild-solvent, and pigmented inks
    Conformability Flat surfaces
    Recommended Laminate Oraguard® 200

    Where can I use Orajet 1917?
    For use in brilliant and colourful displays. The film has long-term protection against UV-rays and mechanical stress when combined with ORAGUARD® laminating films. For indoor applications, when using dye-inks, lamination is required. For outdoor applications with direct contact to water, sealing of the edges is recommended.  Note: check UV outdoor rating for the ink being used.  Long term use in direct sunlight may not be recommended.

    Oracal recommends spreading out to dry for 72 hours before (can be done laying or hanging).  For storage and processing, they should be kept in a cool, dry place protected from sunlight. Relative air humidity between 40% and 50% and temperature between +I8° C and +22° C should be ensured. Direct sunlight, storage beside radiators etc. should by all means be avoided.

    PLEASE READ ENTIRE DESCRIPTION BEFORE PURCHASE OR USE. Product will be shipped loosely rolled, it comes to us on a roll as well. If you have trouble with the curl, try flattening the sheets with a few books prior to printing. Make sure you let your printer know it is a thicker piece of material to avoid jams. 

    OraJet 1917 has a matte smearproof inkjet printable coating, allowing you to print at home with an inkjet printer. Oragard is the recommended laminate for this product by Oracal, but other crafters have used clear 651 as well.

    Recently viewed products

    Reviews

    Oracal Orajet 1917 Inkjet Printable Adhesive Vinyl (Sticker)

    Oracal Orajet 1917 Inkjet Printable Adhesive Vinyl (Sticker)

    5 out of 5 stars

    1 have reviewed this product

    © 2024 RQC Supply Ltd,

      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Google Pay
      • Mastercard
      • Shop Pay
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account