Looking for a vinyl that moves with you? Want to learn how to apply custom designs with it? This is the perfect blog for you! Siser’s EasyWeed Stretch HTV (heat transfer vinyl) is a matte finish vinyl that is super stretchy! It is a great option for those who are looking to create sportswear, as its stretchiness allows it to withstand your movements with ease! It’s so easy to pick up and learn, even for those who do not own a heat press. With Siser’s HTV, you can easily use an at-home iron to transfer your designs! There are tons of colours to choose from in different sizes.

This post will teach you the compatible materials for Stretch HTV, the correct settings for your cutting machine, as well as the step-by-step process of transferring your design.

Compatibility

On top of being iron-friendly, Glitter is also:

• Layerable
• CPSIA Certified
• Laser-Friendly
  

Here is a list of materials that Glitter can be applied to:

• 100% Cotton
• 100% Polyester
• Poly/Cotton Blends
• Leather
• Lycra/Spandex

*Before beginning, you will also want to ensure your cutter is set to the proper settings in order for your design to cut correctly. Refer to this document to check for your specific cutting machine. A quick test cut will help you confirm whether or not your cutter needs any adjustments. 

Tutorial

Feel free to view our video instructional to follow along with the instructions below!

Home Iron Tutorial

1. Firstly, ensure your iron is set between the cotton and linen function. Refer to the list outlining compatible materials before attempting to transfer your design.
   
   
2. You will then want to cover your design with Kraft paper, or a non-stick cover sheet.
   
   
3. Placing your covered design on a flat, hard surface (your ironing board is not recommended for this step). You will need to press down with firm pressure for at least 20 seconds.
   
   
4. If you notice any areas of the cover sheet lifting after application, you can cover your design and press down again for another 5-10 seconds.
   
   
5. Finally, you can now peel the carrier off of your garment hot or cold.

Heat Press Tutorial

1. For those of you who have access to a heat press, you will need to start by cutting your design in reverse. After cutting, you will need to weed any of the excess material.
   
   
2. Make sure your garment or material you are heat transferring to is preheated for at least 2-3 seconds.
   
   
3. Next, apply your design at 320°F / 160°C. If you are an EasyPress user, be sure to add an extra 30°.
   
   
4. Press down with firm pressure for 20 seconds.
   
   
5. Finally, you can peel the carrier off hot or cold.

Laundering Instructions

Be sure to follow these laundering instructions so that your design can set properly without fading or tears. 

1. Wait at least 24 hours before giving your garment its first wash.
   
   
2. Machine wash with cold water using mild detergent.
   
   
3. Do not bleach, dry clean, or use liquid fabric softener.
   
   
4. Dry using the normal dryer setting.

Endnotes

By following these instructions, you will be a Heat Transfer Vinyl pro in no time! Always remember to do test cuts when reconfiguring your cutting machine, and to follow the laundering instructions to avoid fading or stretching on your design. If you’d rather follow along with the video version of this tutorial, feel free to follow this link or the QR code below.

Tags

beginner diy easyweed stretch Heat Press heat transfer vinyl how to iron learning stretch vinyl

Leave a comment

Leave a comment

Name*

Email*

Comment*

Send

• Share on:
• WhatsApp
• Deel
• X
• Pin it
• Messenger
• Email

---