StarcraftDIY Print your own HTV, Printable Iron on Heat Transfers -Dark Materials PRINTABLE TRANSFERS FOR DARK MATERIALS Our inkjet printable transfers for Dark Materials make it easy to create your own printed image for application to colored garments ranging from darker pastels to black. A heat press is recommended for applying this product because of the temperature and pressure requirements. Peel from the backing paper or use heat transfer mask before pressing. StarCraft Transfers for Dark Materials are easy to identify by the red logo printed on the back of each sheet as well as the red instructions. Click here for a you tube video showing you how to use. Click here for more information on the product Application and Care Instructions Press at 350 Degrees for 30 Seconds under MEDIUM pressure Peel when entirely COOL to the touch To wash, turn garment inside out, wash in cold water. Do not bleach. Tumble dry low heat (hang dry recommended). If ironing, do NOT iron directly on the applied image. Heat Transfer Mask is recommended. Larger, one-piece transfers can be applied without a transfer mask. Recommended transfer mask: Siser TTD High Tack Mask sold separately. Now available with Volume Pricing, sold by the sheet, 10pk or 25 pk.
$3.00 - $52.95
Starcraft Metallic Glitter StarCraft glitter is offered in a brilliant collection of premium quality metallic, and holographic colours and chunky mixes. StarCraft glitter is wonderful for adding some shimmer and shine to epoxy, resin, acrylic, cardstock, decoupage, slime, school projects, decor, jewelry, ornaments, and much more. The crafting possibilities are endless and your projects are sure to dazzle and amaze! These metallic shades of glitter are fine cut. Look forward to adding some sparkle to your crafting design. Acid & Alkaline Resistant Heat Resistant Eco-Friendly PET Polyethylene Terephthalate Certificate ASTM;MSDS,SGS,EN71-3 Expert Crafter Tested & Approved! Bottles are 3.75oz by volume and contain approximately 3.5-4.0oz of glitter by weight (not including bottle) for Metallics, Holographics, and Neon Colours. Chunky mixes are approximately 3.0-3.5oz (not including bottle) by weight depending on the style/mix (Gone Coastal weights about 0.5oz less than other mixes. Usage Cautions: Using a PH value above 7.5 may erode the electrodeposition and colour. Colour bleed may occur in alcohol solvent products such as nail polish, always test before applying to the final surface Do not boil in water. Avoid direct contact and/or pressurization with heat. Sizes: Metallics, Holographics, Neons - 1/128" (0.2mm or .008") Chunky Mixes - Vary in sizes, see specific item description
$8.50 - $9.99
Starcraft 3D Puff is the perfect material to give a 3D effect to any design. This multilayered polyurethane HTV technology expands when heat pressed to become a soft puffed up look. Starcraft 3D Puff Heat Transfer Vinyl (HTV) comes in a 12" s 12" sheet. Application Materials: Cotton, Polyester, Cotton/Polyester Blends, not suitable on nylon or other coated textiles Finish: Matte/Flat/Dimensional Carrier: Polyester Application Instructions 2 presses: 1st Press Temperature: 285°F Time: 10-12 Seconds 1st Press Pressure: Medium to firm pressure Peel: Warm To maximize the 3D effect, remove protective (carrier, Parchment or non-stick sheet) and press a second time directly against the heat platen. 2nd Press Temperature: 285°F Time: 5-7 seconds 2nd Press Pressure: Medium to firm pressureIt is the nature of this product for Puff results and texture to vary. It is a good idea to perform a test swatch. Laundering: Wait 24 hours before first wash Machine wash warm or cold with mild detergent Dry on low dryer setting *** Hang to dry is recommended to increase the longevity of the garment and heat transfer vinyl. Drying with heat may also shrink the garment and cause puckering of the heat transfer vinyl so caution is advised. Do not dry clean **Do not stretch 3D StarCraft PUFF as it is susceptible to cracks when stretched.**
$6.00
Chunky Glitter x 1 Bottle - StarCraft Chunky Glitter, this StarCraft glitter is offered in a brilliant collection of premium quality metallic, and holographic colors and chunky mixes. StarCraft glitter is wonderful for adding some shimmer and shine to epoxy, resin, acrylic, cardstock, decoupage, slime, school projects, decor, jewelry, ornaments, and much more. The crafting possibilities are endless and your projects are sure to dazzle and amaze! Acid & Alkaline Resistant Heat Resistant Eco-Friendly PET Polyethylene Terephthalate Certificate ASTM;MSDS,SGS,EN71-3 Expert Crafter Tested & Approved! Bottles are 3.75oz by volume and contain approximately 3.5-4.0oz of glitter by weight (not including bottle) for Metallics, Holographics, and Neon Colors. Chunky mixes are approximately 3.0-3.5oz (not including bottle) by weight depending on the style/mix (Gone Coastal weights about 0.5oz less than other mixes. Usage Cautions: Using a PH value above 7.5 may erode the electrodeposition and color. Colour bleed may occur in alcohol solvent products such as nail polish, always test before applying to the final surface Do not boil in water. Avoid direct contact and/or pressurization with heat. Sizes: Metallics, Holographics, Neons - 1/128" (0.2mm or .008") Chunky Mixes - Vary in sizes, see specific item description
$2.50 - $15.99
DIY Print your own HTV, Printable Iron on Heat Transfers PRINTABLE TRANSFERS FOR LIGHT MATERIALS Our inkjet printable transfers for Light Materials make it easy to create your own printed image for application to light-coloured materials ranging from white to lighter pastel colors. The unique polymer StarCraft uses actually transfers the inkjet printed image to the garment. A heat press is recommended for applying this product because of temperature and pressure requirements. When applying to colored garments you may see the polymer where no ink is printed around the image–this will fade and soften after the garment is washed once or twice. Sold in 8 1/2″ x 11″ sheets, this product is perfect for standard inkjet printers of all types. StarCraft Transfers for Light Materials are easy to identify by the green logo printed on the back of each sheet as well as the green instructions. Click here for help deciding which transfer material is right for your application Click here for more information on this product Application and Care Instructions Press at 375 Degrees for 30 Seconds under HIGH pressure Immediately Peel HOT To wash, turn garment inside out, wash in cold water. Do not bleach. Tumble dry low heat (hang dry recommended). If ironing, do NOT iron directly on the applied image.
$2.25 - $35.00
Holographic Glitter x 1 Bottle - StarCraft Holographic Glitter, this StarCraft glitter is offered in a brilliant collection of premium quality metallic, and holographic colors and chunky mixes. StarCraft glitter is wonderful for adding some shimmer and shine to epoxy, resin, acrylic, cardstock, decoupage, slime, school projects, decor, jewelry, ornaments, and much more. The crafting possibilities are endless and your projects are sure to dazzle and amaze! Acid & Alkaline Resistant Heat Resistant Eco-Friendly PET Polyethylene Terephthalate Certificate ASTM;MSDS,SGS,EN71-3 Expert Crafter Tested & Approved! Bottles are 3.75oz by volume and contain approximately 3.5-4.0oz of glitter by weight (not including bottle) for Metallics, Holographics, and Neon Colors. Chunky mixes are approximately 3.0-3.5oz (not including bottle) by weight depending on the style/mix (Gone Coastal weights about 0.5oz less than other mixes. Usage Cautions: Using a PH value above 7.5 may erode the electrodeposition and color. Colour bleed may occur in alcohol solvent products such as nail polish, always test before applying to the final surface Do not boil in water. Avoid direct contact and/or pressurization with heat. Sizes: Metallics, Holographics, Neons - 1/128" (0.2mm or .008") Chunky Mixes - Vary in sizes, see specific item description
$2.50 - $11.99
Neon Glitter x 1 Bottle - StarCraft Neon Glitter, this StarCraft glitter is offered in a brilliant collection of premium quality metallic, and holographic colors and chunky mixes. StarCraft glitter is wonderful for adding some shimmer and shine to epoxy, resin, acrylic, cardstock, decoupage, slime, school projects, decor, jewelry, ornaments, and much more. The crafting possibilities are endless and your projects are sure to dazzle and amaze! Acid & Alkaline Resistant Heat Resistant Eco-Friendly PET Polyethylene Terephthalate Certificate ASTM;MSDS,SGS,EN71-3 Expert Crafter Tested & Approved! Bottles are 3.75oz by volume and contain approximately 3.5-4.0oz of glitter by weight (not including bottle) for Metallics, Holographics, and Neon Colors. Chunky mixes are approximately 3.0-3.5oz (not including bottle) by weight depending on the style/mix (Gone Coastal weights about 0.5oz less than other mixes. Usage Cautions: Using a PH value above 7.5 may erode the electrodeposition and color. Colour bleed may occur in alcohol solvent products such as nail polish, always test before applying to the final surface Do not boil in water. Avoid direct contact and/or pressurization with heat. Sizes: Metallics, Holographics, Neons - 1/128" (0.2mm or .008") Chunky Mixes - Vary in sizes, see specific item description
$2.50 - $13.99
StarCraft Electra Foils is a safe PVC/phthalate/formaldehyde free water based foil adhesive. Create your own dazzling designs by using heat transfer adhesive along with our Electra Foil products. Electra Foil is available in many solid colours and patterns, making your design options only limited by your imagination. Heat Application: Time: 8-15 seconds Temperature: 280-320° F / 137-160° C Pressure: Medium-Firm Peel: COLD Care Instructions: Do not dry clean; Machine wash COLD / mild detergent; Air Dry; No chlorine bleach; Wait 24 hours before first wash; Wash inside out Recommended Accessories: Siser EasyWeed Adhesive; Multipurpose Paper or Heat Transfer Cover Sheet **DOES not come with adhesive you will need to purchase that separately.** Click here to purchase Easyweed Adhesive **Due to the many variations in monitors and browsers, the colour of products may appear different on different monitors. Computer monitors are not all calibrated equally and colour reproduction on the Internet is not precise. Since it is not possible to guarantee our online colours will look the same on all computers, we do not guarantee that what you see accurately portrays the colour of the actual product. We have made every effort to display as accurately as possible the colours and images of the products we carry and that appear on the website, but cannot guarantee that what you see is an exact representation. If it is important that the colour be exact, it is highly recommended that you place a sample order.
$21.25
Specifications: StarCraft dye-sublimation ink for sublimation printers This multi pack includes 4 sublimation ink bottles, otherwise sold individually 1 - C / Cyan bottle (70mL) 1 - M / Magenta bottle (70mL) 1 - Y / Yellow bottle (70mL) 1 - K / Black bottle (127mL)
$17.00 - $59.99
The StarCraft high-quality Foam Insert is conformable with a variety of cup shapes and sizes. This is the perfect accessory to add while working on multiple cups at one time. This accessory is designed to be compatible with the StarCraft CUP TURNER. ** Note: StarCraft CUP TURNER sold separately. Instructions: Slide the foam insert for 30 oz cups onto the wider end of the Cup Turner Rod. Insert the Rod at the top or bottom of the foam, whichever end best holds your cup firmly in place. Caution: Do not get the foam insert near heat or open flame. Do not allow foam insert to come in contact with adhesive, sealer, paint, or epoxy. If you spill on the foam insert immediately wipe with soap and water. What's In The Box? 1 Foam 30oz Cup Insert or 16oz or 20oz depending on the option you choose at check out.
$7.50 - $8.10
The StarCraft Rod Stand is the perfect accessory to add when working on multiple cups at one time. This product frees up space and offers a sturdy base when removing mostly dry cups off of the StarCraft Cup Turner. Cups are not included. This accessory is designed to be compatible with the StarCraft CUP TURNER. StarCraft CUP TURNER and StarCraft Cup Turner Rods are sold separately. Instructions: To use the StarCraft Rod Stand fold out the tripod legs. Simply Insert the StarCraft Cup Turner Rod inside the Rod Stand cylinder. The Rod Stand will create a sturdy base and make it easy to add or detach rods from the StarCraft Cup Turner. This is a fast and efficient way to start working on your next project. What's In The Box? 1 Rod Stand
$13.75
