Starcraft

   StarCraft Sublimation Paper is available prepackaged Permanent full coverage transfer Specially coated for strong and vibrant sublimation ink hold Crisp and clear high quality images Wide range of applications StarCraft Sublimation Paper offers exceptional transfer performance. Our Sub Paper is optimized for the best application on a variety of substrates. From textile, metal to wood you can expect bright vivid colors and sharp crisp black tones. StarCraft Sublimation Paper offers the quality, consistency and cost effectiveness you need for all your sublimation projects! StarCraft Sublimation Paper should be used with a dedicated sublimation printer along with sublimation ink. We suggest using 60-100% Polyester or Polyester/Cotton blend fabric content T-shirts for best results. Excellent for use with soft or hard light or white color substrate polyester sublimation blanks. Before mass production, always perform at least one test. Keep unused paper in the original plastic and packaging. Store in a cool dry place. Avoid extreme temperatures and continued exposure to direct sunlight. Be careful not to bend or fold the edges or corners of the sublimation paper. For best results we recommend using a Heat Press. Steps 1. Print your design mirrored on the blank side of the sublimation paper, it is normal for the colour to appear less vivid on the sublimation paper. Be cautious as oils from fingertips touching the printed side of the sublimation paper can cause defects. Place a non waxed parchment inside your tshirt to prevent sublimation transfer from bleeding through. 2. Set your Heat Press to 400F, use a lint roller to remove any debris or lint on the tshirt, press for 5 seconds to remove wrinkles from on the tshirt, then position your printed image side down onto the tshirt, use heat tape to hold the design in place if desired. 3. Cover the positioned sublimation sheet with non waxed parchment to catch any bleed.  Press the tshirt for 25-40 seconds with continuous medium pressure, remove the sublimation paper immediately.

Read more less

Protect your StarCraft inkjet printable adhesive vinyl designs using StarCraft Glossy OR Matte UV Laminate.  UV Laminate protects your design from harmful ultra-violet light sources.  Our UV Laminate is specially made to repel adhesives, dirt, grime, and other contaminates. Application Instructions 1.  Print images onto StarCraft inkjet printable adhesive vinyl using a standard consumer grade inkjet printer.  (no laser printers, paper sold sep)2.  Apply StarCraft UV Laminate over the design carefully, avoiding air bubbles.  A squeegee is recommended for application.  It is not recommended to apply an entire sheet if not necessary, apply only enough to cover your printed design.3.  Cut around your design using print and cut technology with a die-cutting machine and software.  Additional pressure or multiple cuts is normally required since the laminate adds another layer. 4.  Peel and stick your design to a clean, dry, wax-free surface.   Additional Notes Our UV laminate is specially formulated to repel dirt, water, and adhesives.  This means the use of transfer tape may be difficult or even impossible.  We recommend simply peeling and sticking your design onto the desination surface.  If your design has small parts that are separated, this may complicate application. Care Instructions 1.  Do not use in dishwasher or microwave.2.  Exposure to harsh environments may reduce life expectancy. 

Read more less