Description
12" STRIPFLOCK PRO SISER HEAT TRANSFER VINYL (HTV) - 1 YARD/3 FT
StripFlock Pro® EasyWeed Siser Heat Transfer Vinyl - Stripflock HTV
The Only Flock in the Industry that can be Layered On Itself.
Available in Black or White Stripflock Pro in a 12" width. This strip flock pro-HTV aka iron-on vinyl is a great alternative to embroidery, StripFlock heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colours make StripFlock excellent for retro designs or anytime you want a rich look. StripFlock looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-colour designs.
MaterialSpecifications:
PVC Composition • Pressure sensitive backing • Suede-like finish • 410 Microns/16.1 Mils • 45°/60° blade • Can be layered
|
Cricut®:
Blade: Standard |
Silhouette Cameo:
Blade: Standard, 4 |
Scan N Cut:
Blade: 4 |
Roland GS/GX-24:
Blade: 45° |
Graphtec:
Blade: 45° |
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier hot or cold
|
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold |
|
StripFlock Applies to:
100% cotton |
Recommended Accessories:
Siser Weeder |
Laundering:
Wait 24 hours before 1st wash |