Description

STARCRAFT 12" 3D PUFF HEAT TRANSFER VINYL (HTV) - 1FT

Starcraft 3D Puff is the perfect material to give a 3D effect to any design. This multilayered polyurethane HTV technology expands when heat pressed to become a soft puffed up look.  Starcraft 3D Puff Heat Transfer Vinyl (HTV) comes in a 12" s 12" sheet.

Application Materials: Cotton, Polyester, Cotton/Polyester Blends, not suitable on nylon or other coated textiles

Finish: Matte/Flat/Dimensional

Carrier: Polyester

Application Instructions 2 presses:

1st Press Temperature: 285°F Time: 10-12 Seconds
1st Press Pressure: Medium to firm pressure Peel: Warm

To maximize the 3D effect, remove protective (carrier, Parchment or non-stick sheet) and press a second time directly against the heat platen.

2nd Press Temperature: 285°F Time: 5-7 seconds
2nd Press Pressure: Medium to firm pressure

It is the nature of this product for Puff results and texture to vary. It is a good idea to perform a test swatch.

Laundering:

• Wait 24 hours before first wash
• Machine wash warm or cold with mild detergent
• Dry on low dryer setting *** Hang to dry is recommended to increase the longevity of the garment and heat transfer vinyl. Drying with heat may also shrink the garment and cause puckering of the heat transfer vinyl so caution is advised.
• Do not dry clean

**Do not stretch 3D StarCraft PUFF as it is susceptible to cracks when stretched.**