Heavy duty swing away 8-in-1 heat press includes easy pressure adjustment, replaceable pressing pad, and an idle auto-off timer which turns off the heating elements based on an adjustable timer up to 60 minutes.
Colour: SilverPlaten Size: 12" x 15" (actual size 12.5" x 14.5")Temperature: Up to 450° F / 800WControls: Digital touch screen with auto-off idle safety timerAttachments: Hat, Plate (8 inch and 10 inch), Mugs (9oz, 11oz and 12oz), Tumbler (fits 20oz and 30oz)*Operating Voltage: 110VBox Dimensions: 22" x 20" x 19"
*Tumbler attachment is not for full wrap
Please Note: Always turn off the power switch when not in use as the auto-off timer is a safety feature only.
This item does not qualify for free shipping. Live shipping rates prevail based upon your cart weight.
package size 56cm x 48cm x 48cm weight 25kg
StarCraft 15" x 15" Clam Shell Heat Press - Mint Color
Heavy duty clam shell heat press includes easy pressure adjustment, replaceable pressing pad, and an idle auto-off timer which turns off the heating elements based on an adjustable timer up to 60 minutes. Unit also features suction cup feet for holding in place during use.
Colour: MintPlaten Size: 15" x 15" (actual size 14.5" x 14.5")Maximum Temperature: 450° FOperating Voltage: 120VBox Dimensions: 28" x 18" x 15"
Please Note: Always turn off the power switch when not in use as the auto-off timer is a safety feature only.
This item does not qualify for free shipping. Live shipping rates prevail based upon your cart weight.
Chunky Glitter x 1 Bottle - StarCraft
Chunky Glitter, this StarCraft glitter is offered in a brilliant collection of premium quality metallic, and holographic colors and chunky mixes. StarCraft glitter is wonderful for adding some shimmer and shine to epoxy, resin, acrylic, cardstock, decoupage, slime, school projects, decor, jewelry, ornaments, and much more. The crafting possibilities are endless and your projects are sure to dazzle and amaze!
Acid & Alkaline Resistant
Heat Resistant
Eco-Friendly PET Polyethylene Terephthalate
Certificate ASTM;MSDS,SGS,EN71-3
Expert Crafter Tested & Approved!
Bottles are 3.75oz by volume and contain approximately 3.5-4.0oz of glitter by weight (not including bottle) for Metallics, Holographics, and Neon Colors. Chunky mixes are approximately 3.0-3.5oz (not including bottle) by weight depending on the style/mix (Gone Coastal weights about 0.5oz less than other mixes.
Usage Cautions:
Using a PH value above 7.5 may erode the electrodeposition and color.
Colour bleed may occur in alcohol solvent products such as nail polish, always test before applying to the final surface
Do not boil in water.
Avoid direct contact and/or pressurization with heat.
Sizes:
Metallics, Holographics, Neons - 1/128" (0.2mm or .008")
Chunky Mixes - Vary in sizes, see specific item description
The StarCraft high-quality Foam Insert is conformable with a variety of cup shapes and sizes. This is the perfect accessory to add while working on multiple cups at one time. This accessory is designed to be compatible with the StarCraft CUP TURNER. ** Note: StarCraft CUP TURNER sold separately. Instructions: Slide the foam insert for 30 oz cups onto the wider end of the Cup Turner Rod. Insert the Rod at the top or bottom of the foam, whichever end best holds your cup firmly in place. Caution: Do not get the foam insert near heat or open flame. Do not allow foam insert to come in contact with adhesive, sealer, paint, or epoxy. If you spill on the foam insert immediately wipe with soap and water. What's In The Box? 1 Foam 30oz Cup Insert or 16oz or 20oz depending on the option you choose at check out.
The StarCraft cup turner is a sleek, easy-to-use cup tuner made from quality grade aluminum. The 2-way motor is perfect for use with mediums of different viscosities; from runny to a thicker viscosity, and the fast 5/6 RPM rotation speed ensures even coverage and consistent results. With a simple flip of a switch, you can change the turn direction from clockwise to counterclockwise, making it easy to customize your cup turning experience. For the perfect cup every time, choose the StarCraft cup turner.
Does not ship for free
The StarCraft Rod Stand is the perfect accessory to add when working on multiple cups at one time. This product frees up space and offers a sturdy base when removing mostly dry cups off of the StarCraft Cup Turner.
Cups are not included. This accessory is designed to be compatible with the StarCraft CUP TURNER. StarCraft CUP TURNER and StarCraft Cup Turner Rods are sold separately.
Instructions: To use the StarCraft Rod Stand fold out the tripod legs. Simply Insert the StarCraft Cup Turner Rod inside the Rod Stand cylinder. The Rod Stand will create a sturdy base and make it easy to add or detach rods from the StarCraft Cup Turner. This is a fast and efficient way to start working on your next project.
What's In The Box? 1 Rod Stand
StarcraftDIY Print your own HTV, Printable Iron on Heat Transfers -Dark Materials
PRINTABLE TRANSFERS FOR DARK MATERIALS
Our inkjet printable transfers for Dark Materials make it easy to create your own printed image for application to colored garments ranging from darker pastels to black. A heat press is recommended for applying this product because of the temperature and pressure requirements. Peel from the backing paper or use heat transfer mask before pressing.
StarCraft Transfers for Dark Materials are easy to identify by the red logo printed on the back of each sheet as well as the red instructions.
Click here for a you tube video showing you how to use.
Click here for more information on the product
Application and Care Instructions
Press at 350 Degrees for 30 Seconds under MEDIUM pressure
Peel when entirely COOL to the touch
To wash, turn garment inside out, wash in cold water. Do not bleach.
Tumble dry low heat (hang dry recommended).
If ironing, do NOT iron directly on the applied image.
Heat Transfer Mask is recommended. Larger, one-piece transfers can be applied without a transfer mask.
Recommended transfer mask: Siser TTD High Tack Mask sold separately.
Now available with Volume Pricing, sold by the sheet, 10pk or 25 pk.
DIY Print your own HTV, Printable Iron on Heat Transfers
PRINTABLE TRANSFERS FOR LIGHT MATERIALS
Our inkjet printable transfers for Light Materials make it easy to create your own printed image for application to light-coloured materials ranging from white to lighter pastel colors. The unique polymer StarCraft uses actually transfers the inkjet printed image to the garment. A heat press is recommended for applying this product because of temperature and pressure requirements. When applying to colored garments you may see the polymer where no ink is printed around the image–this will fade and soften after the garment is washed once or twice. Sold in 8 1/2″ x 11″ sheets, this product is perfect for standard inkjet printers of all types.
StarCraft Transfers for Light Materials are easy to identify by the green logo printed on the back of each sheet as well as the green instructions.
Click here for help deciding which transfer material is right for your application
Click here for more information on this product
Application and Care Instructions
Press at 375 Degrees for 30 Seconds under HIGH pressure
Immediately Peel HOT
To wash, turn garment inside out, wash in cold water. Do not bleach.
Tumble dry low heat (hang dry recommended).
If ironing, do NOT iron directly on the applied image.
Holographic Glitter x 1 Bottle - StarCraft
Holographic Glitter, this StarCraft glitter is offered in a brilliant collection of premium quality metallic, and holographic colors and chunky mixes. StarCraft glitter is wonderful for adding some shimmer and shine to epoxy, resin, acrylic, cardstock, decoupage, slime, school projects, decor, jewelry, ornaments, and much more. The crafting possibilities are endless and your projects are sure to dazzle and amaze!
Acid & Alkaline Resistant
Heat Resistant
Eco-Friendly PET Polyethylene Terephthalate
Certificate ASTM;MSDS,SGS,EN71-3
Expert Crafter Tested & Approved!
Bottles are 3.75oz by volume and contain approximately 3.5-4.0oz of glitter by weight (not including bottle) for Metallics, Holographics, and Neon Colors. Chunky mixes are approximately 3.0-3.5oz (not including bottle) by weight depending on the style/mix (Gone Coastal weights about 0.5oz less than other mixes.
Usage Cautions:
Using a PH value above 7.5 may erode the electrodeposition and color.
Colour bleed may occur in alcohol solvent products such as nail polish, always test before applying to the final surface
Do not boil in water.
Avoid direct contact and/or pressurization with heat.
Sizes:
Metallics, Holographics, Neons - 1/128" (0.2mm or .008")
Chunky Mixes - Vary in sizes, see specific item description
Starcraft inkjet printable matte finish permanent adhesive vinyl is specially designed for use with consumer grade inkjet printers (no laser printers) and can be used for print and cut operations with most any craft die-cutting machine. Print images using a standard inkjet printer and use print and cut technology with a die-cutting craft machine to cut around your image. Adhesive is permanent and waterproof. Appy to a smooth, clean, dry surface. Life expectancy is 1-3 Years Outdoors with average exposure to weather and elements. Severe conditions, detergents, and other factors may affect life of product outdoors.
Printing and Application Instructions 1. Print image right-facing (do not mirror) using print-and-cut with your die-cutting machine software. Print on the plain white side (not the side with the logo watermark).2. Use your die-cutting software and machine to cut around image.3. Peel and stick image to surface. For best results, surface should be clean, dry, and smooth (non-porous). Do not use window or other ammonia-based cleaners. Isopropyl alcohol is recommended for cleaning surfaces prior to application.4. Use of transfer tape may damage printed image and is not recommended. Testing is recommended before using transfer tape. If you are using our UV Laminate to protect the image, transfer tape will not likely work or be difficult to use because the UV Laminate is specially formulated to repel adhesives, dirt, grime, and other contaminates.
Care Instructions 1. Do not use in dishwasher or microwave.2. Inkjet printed vinyl can be more prone to damage if handled or exposed to harsh elements. For best protection, apply StarCraft UV laminate prior to cutting with your die-cutting machine and software. You may also use a third-party UV acrylic spray to protect your image (StarCraft only offers laminate options).3. We recommend feeding one sheet at a time when printing. Do not load with other media types. Some printers may have difficulty feeding thicker substrates such as printable vinyl, especially flat tray fed printers.
Neon Glitter x 1 Bottle - StarCraft
Neon Glitter, this StarCraft glitter is offered in a brilliant collection of premium quality metallic, and holographic colors and chunky mixes. StarCraft glitter is wonderful for adding some shimmer and shine to epoxy, resin, acrylic, cardstock, decoupage, slime, school projects, decor, jewelry, ornaments, and much more. The crafting possibilities are endless and your projects are sure to dazzle and amaze!
Acid & Alkaline Resistant
Heat Resistant
Eco-Friendly PET Polyethylene Terephthalate
Certificate ASTM;MSDS,SGS,EN71-3
Expert Crafter Tested & Approved!
Bottles are 3.75oz by volume and contain approximately 3.5-4.0oz of glitter by weight (not including bottle) for Metallics, Holographics, and Neon Colors. Chunky mixes are approximately 3.0-3.5oz (not including bottle) by weight depending on the style/mix (Gone Coastal weights about 0.5oz less than other mixes.
Usage Cautions:
Using a PH value above 7.5 may erode the electrodeposition and color.
Colour bleed may occur in alcohol solvent products such as nail polish, always test before applying to the final surface
Do not boil in water.
Avoid direct contact and/or pressurization with heat.
Sizes:
Metallics, Holographics, Neons - 1/128" (0.2mm or .008")
Chunky Mixes - Vary in sizes, see specific item description
Starcraft 3D Puff is the perfect material to give a 3D effect to any design. This multilayered polyurethane HTV technology expands when heat pressed to become a soft puffed up look. Starcraft 3D Puff Heat Transfer Vinyl (HTV) comes in a 12" s 12" sheet.
Application Materials: Cotton, Polyester, Cotton/Polyester Blends, not suitable on nylon or other coated textiles
Finish: Matte/Flat/Dimensional
Carrier: Polyester
Application Instructions 2 presses:
1st Press Temperature: 285°F Time: 10-12 Seconds 1st Press Pressure: Medium to firm pressure Peel: Warm
To maximize the 3D effect, remove protective (carrier, Parchment or non-stick sheet) and press a second time directly against the heat platen.
2nd Press Temperature: 285°F Time: 5-7 seconds 2nd Press Pressure: Medium to firm pressureIt is the nature of this product for Puff results and texture to vary. It is a good idea to perform a test swatch.
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with mild detergent
Dry on low dryer setting *** Hang to dry is recommended to increase the longevity of the garment and heat transfer vinyl. Drying with heat may also shrink the garment and cause puckering of the heat transfer vinyl so caution is advised.
Do not dry clean
**Do not stretch 3D StarCraft PUFF as it is susceptible to cracks when stretched.**
